
Multi Jet Fusion® HP®
Serial production with no upfront costs
The Multi Jet Fusion® technology introduced by HP® is a good alternative to traditional plastic injection molding in terms of volume and production time, avoiding both mold production and the need for minimum batch sizes.
Loading this video consents to connecting to YouTube (Google), which receives your IP and technical data and may use storage technologies. It is optional: continue reading without loading it, or stop it at any time. This choice applies only to this video on the current page.

Production speed
Fast turnaround of batches of hundreds or thousands of parts in a short turnaround time.

An alternative to molding
HP Multi Jet Fusion is a good alternative to injection molding: no mold, no minimum batch size.

Functional parts
Optimised and specific printing mode which improves mechanical properties while maintaining high accuracy.

High performance materials
A variety of thermoplastics, including glass-filled ones, for the manufacture of rigid functional components with high stability.
TECHNICAL DATA
Detailed material data
| Property | Value | Standard |
|---|---|---|
| General Properties | ||
| Density of parts | 1.01 g/cm³ | ASTM D972 |
| Mechanical Properties | ||
| Tensile Strength, Max Load — XY | 50 MPa / 6960 psi | ASTM D638 |
| Tensile Strength, Max Load — Z | 50 MPa / 6960 psi | ASTM D638 |
| Tensile Modulus (XY) | 1700 MPa / 245 ksi | ASTM D638 |
| Tensile Modulus (Z) | 1900 MPa / 245 ksi | ASTM D638 |
| Elongation at Break (XY) | 17% | ASTM D638 |
| Elongation at Break (Z) | 9% | ASTM D638 |
| Thermal Properties | ||
| Heat Deflection Temperature (0.45 MPa) (Z) | 175°C | ASTM D648 |
| Heat Deflection Temperature (1.82 MPa) (Z) | 95°C | ASTM D648 |
General Properties
Density of parts
Mechanical Properties
Tensile Strength, Max Load — XY
Tensile Strength, Max Load — Z
Tensile Modulus (XY)
Tensile Modulus (Z)
Elongation at Break (XY)
Elongation at Break (Z)
Thermal Properties
Heat Deflection Temperature (0.45 MPa) (Z)
Heat Deflection Temperature (1.82 MPa) (Z)

Juno is an HP Multi Jet Fusion Tech Center
HP Multi Jet Fusion Tech Centers are certified suppliers in the international Digital Manufacturing Network, selected for their expertise and experience. Results depend on the material, geometry, process and application requirements.